Lubi Pumps

Product Details:

Applications:

• For suitable liquids which are thin, clean, non-explosive, non-aggressive, not containing solid particles or fibers. 
• For water supply systems and irrigation.
• For heating, cooling, air-conditioning and circulation plants. 
• For civil, industrial and fire fighting applications.

Features:

• The pump casing shall have material of construction of Cast Iron FG 260 (standard supply), Bronze LTB2, CF8, CF8M, axial suction and radial discharge port, dynamically balanced impeller, steel shaft, stainless steel shaft sleeve.
•  The Pump shaft sealing shall be by mechanical shaft seal of Carbon/Ceramic/NBR/AISI 304 construction suitable for 10 bar pressure rating and water temperature from 0 to +90 deg. C.
•  The pump shall be close coupled with a totally enclosed fan cooled type (TEFC) Induction motor, with F class insulation, S1 duty and IP55 protection, suitable for 3 phase 415 volts, 1 phase, 230 volts power supply.
•  The pump shall have back pull out design so as to enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.
•  All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Product Details:

Performance:

• Cascade control, only the required number of pump is in operation at any time.
• Single phase prevention & overload motor prevention.
• Dry run protection & low pressure protection.
• Manual operation
• Pump ON & pump Fault indication.
• Automatic alternation (changeover) of lead pump to ensure
• Equal run time of all pumps.
• At the heart of the controller is a PLC with 5.7” Color touch Screen Display
• (HMI) to program the Aquapack 1000 system as per the site requirement.
• Also available VFD controls for power saving

Applications:

• Transfer and pressure boosting of clean water for community water supply, Apartment complex, Hotels, Hospitals, Industries, Commercial buildings, Schools, etc.

Features:

• The pumps shall be non-self-priming, vertical multistage centrifugal pumps. The pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tiebolts. The base has suction and discharge connections on the same level (in-line). All pumps shall be equipped with a maintenance-free mechanical shaft seal.
• Aquapack 1000 shall be built up on a common base frame. The pumps are fixed to the base frame by means of bolts.
• The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection, 3 phase, 415 volts, 1 phase, 230 volts, 50 and 60 Hz power supply.
• A pressure switch or a level switch at the suction side can be used as dry-running protection. When the water level or pressure has been restored, automatic or manual resetting is possible.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Product Details:

Features:

• In LCR The pump base and head cover shall be of Cast Iron grade FG 260 as per IS 210/ ISO 186 with inline suction and discharge connection. In LCRI the pump base shall be made of CF8 material, the pump head shall be of Cast Iron grade FG 260, pump head cover shall be of CF8M material. In LCRN The pump base and head cover shall be made of investment cast CF8M Stainless steel.
• The pump shaft shall be made of stainless steel AISI 316 material .
• The Pump shaft sealing shall be of carbon/SiC/SS316 /EPDM material and suitable for water temperature from 0 to +120 deg. C.
• The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection, 3 phase, 415 volts, 1 phase, 230 volts, 50 and 60 Hz power supply
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Application:

• For thin, non-explosive, not containing solid particles or fibers, noncorrosive liquids are suitable.
•  For liquid transfer, circulation and pressure boosting of cold or hot clean water.
•  For water supply systems, pressure boosting systems, liquid transfer and irrigation works.

Product Details:

We are dealing in SS MonoBlock offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

Features:

• Pumps shall be designed to withstand voltage drops to 320 volts.
• Better insulating materials are used so that monoblock can withstand high temperature rise.
• High operating efficiencies of the monoblock result into greater water discharge rate and lower power bills.
• The “back pullout” facility enables the monoblock to be serviced without disturbing the pipe work. <
• All components are manufactured from materials as per standard specification. They are precisely machined on modern machine tools to give you years of reliable operation.
• All Monoblock windings are vacuum impregnated with sybthetic varnish for bettermoisture resistance.
• All rotating components and assemblies are dynamically balanced to ensure long bearing life and vibration free smooth operation.
•  All monoblock are fully tested as per the specification prior to dispatch.

Application:

• Irrigation of Fields / Farms
• Community water supply
• Industries
• Housing complexes
• Fire Fighting system

Product Details:

We are dealing in Lubi Sewage Submersible pump and offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

We are dealing in Lubi long coupled End Suction Centrifugal Pump and offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

Applications:

• Commercial complexes and high rise buildings, Petrochemical industries and Gas plants, Airports and ports, Jetties, Marine applications, Power stations and transformer stations Chemical industries, Manufacturing plants Fire-work industries, Warehouses/godowns.

Product Details:

Applications:

• Commercial complexes and high rise buildings, Petrochemical industries and Gas plants, Oil and Gas on-shore & off-shore platforms, Oil terminals Airports and ports, Jetties, Marine applications, Power stations and transformer stations Chemical industries, Manufacturing plants Fire-work industries, Warehouses/godowns.

Features:

• The pump shall be designed for clean and clear room temperature water to be used in fire fighting application.
• The pump casing shall be of Cast Iron grade FG 260 as per IS 210 / ISO 186 with inline suction and discharge port.
• The pump casing shall have threaded ports near suction and delivery flanges for installing suction and discharge pressure gauges. The pump shall also have a threaded drain port at the bottom of casing for draining the pump during maintenance.
• The pumps shall have closed type impeller with Bronze LTB2 (standard supply) &amp; Cast Iron FG 260 material.
• The pump induction motor shall have F class insulation and S1 duty. TEFC motors shall be with IP55 protection.
• The Motor shall be suitable for 3 phase, 415volts, 50 Hz power supply.
• The pump accessories Suction and discharge pressure gauge &amp; Casing relief valve shall be supplied on request.
• The entire pump set including base plate and motor are to be painted RAL3002.

Product Details:

Application:

• Drainage of sewage from the building basements, hotels, industries, process plant, waste water from factories.
• Emptying septic tanks, cesspits and sewage pump stations. 
• Pumping surface and drainage water from garages and sprinkler systems. 

Features:

• A precision manufactured motor is achieved utilizing a laminated sheet steel production process combined with the highest standard of quality control. The stator and wiring is impregnated with varnish and then heat dried in an industrial oven. This ensures a 100%quality manufactured motor with stable characteristics and a high efficiency. 
• Standard accessories include: Thermoplastic rubber cable with an epoxy resin sealed stainless steel cable base, AC thermal motor protector, dual mechanical seal and lip seal.

Product Details:

Applications

• Process water systems.
• Washing and cleaning systems.
• High-pressure wash down systems.
• Boiler feed and condensate systems.
• Ultra-filtration systems.
• Reverse osmosis systems.

Product Details:

Applications:

• Cooling & Heating Systems
• Pressure Boosting Systems
• Industrial Applications
• Water Supply
• Fire Protection System

Features:

• The pump casing shall have material of construction of Cast Iron FG 260 (standard supply) or CF8 (AISI 304), inline suction and discharge port, closed type impeller, stainless steel shaft.
•  The Pump mechanical shaft seal with following material suitable for 16 bar pressure rating.
•  The pump suction and delivery flange connection shall be as per PN 16 standard up to 16 bar pump shut off pressure and as per PN25 for pumps with shut off pressure above 16 bar.
•  The pump shall be coupled with a Totally Enclosed Fan Cooled (TEFC) type induction motor, with F class insulation, S1 duty and IP55 protection, 3 phase, 415volts, 50 Hz and 60 Hz power supply.
•  The pump construction should enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.

Product Details:

Features:

• The pump casing shall be of Cast Iron grade FG 260 as per IS 210 / ISO 186 and have axial suction and radial discharge port.
• The pump shall have fabricated closed type impellers and bowl diffuser casings made out of AISI 304 Stainless steel sheet metal.
• The Pump shaft sealing shall be by mechanical shaft seal of Carbon/Ceramic/NBR/AISI 304 construction suitable for 10 bar pressure rating and water temperature from 0 to +90 deg. C.
• The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection. 1 phase, 230 volts, 50 Hz (Standard Supply), 3 phase, 415 volts, 50 Hz.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Application:

• The pump shall be designed for liquids which are non-aggressive and non-explosive, without solids or fibers
• Liquid transfer and circulation of liquids within light industry and farming
• Pressure boosting in single-pump and multi pump booster systems
• Domestic water supply
• Cooling systems
• Air-conditioning systems
• Washing and cleaning systems
• Water treatment.

Product Details:

We are dealing in Lubi Vertical inline and offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

Applications:

• Used in pressure sewage system. Drainage of waste water from individual residences, apartment, buildings, recreational developments, motels. Transferring waste water of commercial buildings, industrial plants, waste water sampling, small hospitals. Schools, federal, state and local parks’ waste water drainage. To transfer various waste water and sewage

Product Details:

Applications:

• Civil engineering dewatering of tunneling and ground works, also for storm water sewers. 
• Dewatering of fluids containing solid sediments.

Features:

• Specifically designed for civil engineering applications, where a heavy duty, light weight, top discharge design, is required which is easy to handle. The double outer casing, water cooled motor makes it particularly suitable for low water level applications.
• A water detector is provided in the seal chamber. In case of seal failure if water enters the seal chamber, a signal can be sent to the control panel so that the pump operator is made aware of a potential seal leakage problem. 
• A fully waterproof IP 68 stainless steel structure, combined with a high grade silicon carbide double mechanical seals.
• The LAS range of pumps are compact, strong and easy to operate in any situation. 
• Special designed high efficient and wear resistant HCR (High Chrome) impeller.
• Multi impeller design suitable from high head with small capacity to low head with large capacity of application requirement. 
• Optional discharge connection (Hose, flange and thread connection)

Product Details:

Applications:

• Turning, Chilling, Part washing, Filtration, Condensate systems, Wash and clean, Part washing, Milling, Grinding, Spark erosion, Wire cutting

Product Details:

Durable heavy duty finned cast iron construction. Features Grinder is complete unit, light weight, compact, and portable, easy to be installed. Double protection at connection box: barrier grommet, barrier epoxy, prevent water ingress to the motor area, assuring a longterm reliable operation. Additionally, epoxy encapsulation and stripped leads positively eliminate wicking from the cable

Product Details:

We are dealing in  End Suction Centrifugal Pump and offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

We are dealing in Large Volume Water Pump and offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

We are dealing in Lubi Mud pump and offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

Features:

• The pump volute shall be of cast Iron grade FG260 as per IS 210/ISO 486 with vertical discharge port, semi open radial impeller with material of construction of Cast Iron (standard supply), CF8 and CF8M, suitable for pumping liquids up to 50 deg. C.
• The pump shaft shall be made of stainless steel as per ASTM A582 and grade of AISI 410.
• The Pump shaft sealing shall be supplied with double mechanical shaft seal of material Carbon/Ceramic/NBR/AISI 304 up to 1 Hp and above 1 Hp the mechanical shaft seal material shall be Sic/Sic /Viton /AISI 316 at the pump end.
• The pump shall be close coupled with dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, epoxy sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged, 1 phase, 240 volts, 3 phase, 415 volts.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Application:

• The pump shall be designed for muddy water with solids.
• Slushy water, waste water without solids, sump drainage.
• Drainage application, flood control.
• Dewatering for fish pond or basement.

Product Details:

Applications:

• Industrial cooling water application. Industrial washing & cleaning systems. Fire fighting application. Domestic water supply systems. Water supply in commercial buildings, apartments, complexes, hotels, hospitals, schools, bunglows, etc. Sprinkler systems. Gardens, farms & fountains. Dewatering applications.

Features:

• The pump casing shall be of cast iron grade of FG 260 as per IS 210/ISO 186 with axial suction and radial discharge port, dynamically balanced impeller, steel shaft.
• The Pump shaft sealing shall be by mechanical shaft seal of Carbon /Ceramic/NBR/AISI 304 material of construction and suitable for liquid temperature from 0 to +50 deg. C.
• The pump end shall be close coupled to a rewindable water filled and water lubricated submersible motor with S1 duty and IP68 protection, 3 phase, 415 volts, 50 Hz and 60 Hz power supply.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Product Details:

We are dealing in Cutter Pump and offering this at a very good price too.
Its is one of the leading wholesale Trader of Lubi Pumps, Beacon Pumps, Kirloskar Pumps, Etc. The range of products offered by us is of premium quality that boasts of client's confidence.

Product Details:

Applications:

• Cooling & Heating Systems
• Pressure Boosting Systems
• Industrial Applications
• Water Supply
• Fire Protection System

Features:

• Pump body shall be made of stainless steel & impellers shall be made of stainless steel AISI 304. Motor shaft is made of stainless steel AISI 420. Guide vane is made of glass reinforced PPO.
• The pump is fitted with a maintenance-free, mechanical shaft seal.
• Motor and pump are close coupled in a convenient and compact design for quick installation in limited space.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness

Product Details:

Features:

• Pump body shall be made of stainless steel & impellers shall be made of stainless steel AISI 304. Motor shaft is made of stainless steel AISI 420. Guide vane is made of glass reinforced PPO.
• The pump is fitted with a maintenance-free, mechanical shaft seal.
• Motor and pump are close coupled in a convenient and compact design for quick installation in limited space.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Application:

• Ultra-filtration systems
• Reverse osmosis systems
• Pressure boosting in domestic, civil and industrial water supply systems
• Washing and cleaning
• Hydro-pneumatic systems
• Sprinkler systems
• Irrigation.

Product Details:

Applications:

• The pump shall be designed for muddy water or liquids or effluents with solids or fibers. The liquid shall be compatible with material of construction of the pump.
• Industries: Petrochemical, fertilizers, pharmaceutical, dyes & intermediate industries, effluent treatment plants, food processing plants, sewage plants, starch, paper, sugar plants, thermic fluid circulations, fatty acid distillation plants.
• Public utilities: For pumping muddy water, sewage and polluted liquids, dewatering of swimming pools.
• Civil engineering: Flood drainage, sewage pumping, fire fighting, dewatering of canals and ponds.
• Construction industries: Dewatering of excavation, small pits, basements, trenches, construction sites.
• Marine: Loading and unloading, dewatering of docks & vessels, bilge pumping.
• Waste treatment: Pumping polluted, hot or corrosive waste water containing sand, mud or solids, in suspension, dosing neutralizing liquid, pumping out settled sludge.
• Agriculture: Surface irrigation, liquid manure oxygenation, distribution of liquid animal feed, washing.
• Any other applications where priming is to be avoided.

Features:

• The pump casing shall be of Cast Iron material grade FG 260 as per IS 210 / ISO 186 and shall have axial suction and radial discharge port..
• The pumps shall have non-clogging open type impeller with material of construction of Cast Iron FG 260 (standard supply), CF8 & CF8M.
• The pump shaft sealing will be with gland packing except for pump up to 1 hp rating shall be with mechanical shaft seal.
• The Motor will be suitable for the following power supply 3 phase, 415 volts, 50 Hz & 1 phase, 240 volts, 50 Hz.
• The pump shall have back pull out design so as to enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.

Product Details:

Applications:

• Chemical process
• Pharmaceutical
• Food & Beverage processing
• Steel plants
• Automobile
• Marine/Sea water
• Water supply
• Booster service
• Cooling water
• Water treatment/Purification
• OEM.

Features:

• These pumps shall be available in Noryl or Polypropylene material of construction and closed coupled with standard TEFC motor. They are also available as long-coupled with standard TEFC as well as Flame Proof motor.
• The pumps shall be made of Noryl, which is non-metallic and chemical-resistant to most acids, alkalis, and inorganic solvents.
• The pumps are made of non-metallic, glass-filled Polypropylene construction offering chemical resistance to most acids, alkalis, and inorganic solvents as does the Noryl series.
• The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection. 1 phase, 230 volts, 50 Hz (Standard Supply), 3 phase, 415 volts, 50 Hz

Product Details:

Features:

• State-of-the art compact design
• Easy and simple to install
• User-friendly operation
• Quiet running
• Reliable and robust construction
• Back pull-out design which simplifies inspection and maintenance
• Rotating parts are balanced by design & construction which ensures vibration free performance and enhanced life
• High performance hydraulics
• Double-row angular contact motor side and single-row deep groove pump side bearings provide excellent axial and radial load support.
• Rigid foot design
• Proper oil/Grease lubrication is essential for long-term life of bearings and pumpset

Application:

• Chemical process
• Pharmaceutical
• Food & Beverage processing
• Steel plants
• Automobiles
• Marine/Sea water
• Water supply
• Booster service
• Cooling water
• Water treatment/Purification
• OEM
• Drug and pharmaceutical
• Agro chemicals
• Detergents and caustics

Product Details:

Applications

• Ideal for Filter Press applications in Dyes, Intermediates, Chemicals, Textiles, Ceramics, Waste Oil Refining etc. industries. Oil & Petrochemicals Industries.
• Effluent Treatment Plants, Loading, Unloading of Chemicals, Light Petroleum Products.

Features:

• Semi-open type impeller designed to handle slurries with solids.
• Side & Gland Suction & Top Discharge connection.
• Least Leakage due to gland portion on Suction side.
• Shaft is protected from Sleeve which gives longer life of shaft. 
• Heavy duty oil lubricated bearing housing with two nos. of std. ball bearings.
• Available in All Cast Iron, Cast Steel, Cast Iron with stainless steel Rotating Parts, All SS-304 & SS-316 MOC.
• All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Product Details:

Applications

• Drainage of sewage from the building basements, hotel industry, waste water from factories.
• Drainage of sewage from industrial process factories.
• Emptying fo septic tanks, cesspits and sewage pump stations.
• Pumping surface and drainage water from garages and sprinkler systems

Product Details:

Performance:

• Cooling & Heating Systems
• Pressure Boosting Systems
• Industrial Applications
• Water Supply
• Fire Protection System

Application:

• Cooling & heating systems
•  Pressure boosting systems 
• Industrial applications
•  Water supply
•  Fire protection systems.