Beacon Pumps

Product Details:

Product Details:

Product Details:

• General Water Duties
• Fresh Water Supply
• Pumping of Oil and Hydrocarbons
• Cooling Water Application
• Fire Fighting

• Uniglide Size : 80 mm x 50 to 1400 mm x 1200 mm
• Head : 5 m to 200 m
• Discharge : 30 M³/Hr to 20,000 M³/Hr
• Duoglide Size : 200 mm x 80 mm to 300 mm x 250 mm
• Head : 35 m to 240 m
• Discharge : 14 M³/Hr to 1440 M³/Hr

• Shaft Sleeve: Renewable Sleeves driven by an extension of the Impeller Key,extend through the Stuffing Boxes to protect the Shaft.
• Bearing: The Bearing Housing are carried in rigidly constructed brackets cast integrally with the pump casing and the housings dowelled to provide positive location. The standard bearing arrangement comprises a roller bearing at the driving end of the pump and a ball bearing at the non-drive end.
• Stuffing Box: Conventional packed glands using pre-lubricated cotton packing. Mechanical seal as an option can be provided. The gland is split and can easily be removed to provide full accessibility for packing removal. A lantern ring is fitted to receive the pump liquid at delivery pressure to lubricate packing and also to provide a seal to prevent the ingress of air.
• Flangers: Drilled to BS standards. Other Standards are optional.
• Direction of Rotation: Anti-clockwise from driving end as standard,clockwise at special request.
• Arrangement: The standard range is of horizontal type. However,vertical arrangement is possible on specific cases.

Product Details:

• BCP types are particularly noted for handling clean or slightly turbid non-aggresive liquid. They are suitable for pumping condensate, including water upto 100'c, irrigation, general water supply in agriculture,trade and industries with favourable NPSH conditions.

• Horizontal single stage volute casing pumps, dimension corresponds to DIN 24255 with end suction, top Centreline discharge. Back pull-out desgin, enables to remove the rotor assembly without disturbing the pipe lines. The support feet are integrally cast with volute casing.
• The BCP range comprises of 32 pump types with 3 shaft sizes which cover the entire range with maximum interchangeability.
• For pumps belonging to a particular shaft size, shaft, shaft sleeve, impeller nut and bearings are interchangeable. Impeller is hydraulically balanced by back vanes, in the case of larger impeller diameter by renewable wear ring and relief holes.

• Made of accurately ground high tensile steel supported with conventional oil lubricated two Deep Groove Ball Bearings. Grease lubrication will be an option.

• Flanges dimension as per DIN 2532/2533, ANSI/BS will be an option.

Product Details: